It is not easy to deal with a clogged dehumidifier coil. But there are some simple steps that you can follow in order to unclog the humidifier from inside and restore its ability to dry your air. Here is how to clean dehumidifier coils and bring them back to optimal functioning.
In case you do not understand the technical term for how to clean a dehumidifier, it is important to note that this is a specialized field. The process of cleaning a humidifier involves removing any water that might have collected inside it. This can be achieved by pulling out the air system. If you do not know how to do this, you will need to hire the services of a professional.
In order to remove any water or moisture from the coils, place your index finger over it. This would cause suction to begin in order to pull the water out. Once this has begun, hold the air system close to the coils and slowly blow out air until it reaches the dehumidifier. Do this repeatedly until there is absolutely no water left in the coils.
When cleaning the coil, do not use the same cleaning tool that you used to remove the water. Instead, replace the tool with one that is specifically designed for coils. The reason is that the dirt that accumulates inside the air coil can be hazardous. Some of this dirt might even be poisonous.
One of the first things that you should remember when you are learning how to clean dehumidifier coils is that moisture is bad for the HVAC system. Make sure to keep the room in which your dehumidifier is located as dry as possible. You may also want to consider a dehumidifier cover. A cover will help keep any water or moisture that may have collected on the coils from evaporating. If you do not have a cover, you will need to regularly wipe the coils with a damp cloth. Make sure that the cloth is not too dirty or oily and that it is not too tight.
You will know if the water level in your dehumidifier coils is too high when you hear knocking sounds. If so, you should lower the level gradually. This is because too high of a level can cause the air to become too moist. If this happens, you risk having the air conditioner work harder and produce more moisture that can cause damage to your hoses and other parts.
Once you have lowered the level on your dehumidifier coils, you are ready to clean the coils. Use the correct cleaning solution for your dehumidifier. Do not use tap water as this can corrode the coils. Do not use tap water and salt shaker either.you can Read more about Best Dehumidifier For Camper Review.
Before cleaning your dehumidifier, turn it on to the “standby” mode. This will let it run for a few minutes without the water in it. When it is done, you can clean out all the water in the unit by simply turning it off.
Before beginning, make sure that all of the water is drained from the system. It is too wet or dirty when cleaning when there is still water in it. Also, place the degreaser and water container next to each other and spray from one container down the other. Use your elbow to massage the dirt out of the coil while you are cleaning it.
Start at the bottom of the coil. Clean the coil with the degreaser. After you have removed as much as you can, pour the rest of the cleaner into the coil. Then shake the bottle until you get the entire buildup into a pile near the bottom of the coil. It will take several hours before you are able to remove it completely.
After you have cleaned the dehumidifier, check it for leaks. If it is not leaking, you are free to replace it. If it is, however, use some silicon to thicken the plastic seal surrounding the area
around the pump. Then coat it with silicone sealant and re-plug the device. Repeat this process until you find no more leaks.
Before using the dehumidifier again, disconnect it from the power source. Do not reinstall the motor. Now you know how to clean dehumidifier coils? It is easy! Have fun!
